Product Description

The Remoticom ZSC010 "Zhaga Smart Controller" is an innovative module for outdoor applications, designed to configure and setting up individual luminaires. It automatically connects to the Global Navigation Satellite System (GNSS) to obtain date and time information in real time. If correct time information is not available via the GNSS, the existing light sensor takes over the switch-on function.

Configuration of on-off switching, astronomical table or dimming profile based on date and time, or selecting the device mode (i.e. Mains, Astro or Photocell) can be realized using the Remoticom ZSC010 app, available only for Android smartphones in the Google Play store.

This product is ideal to replace a photocell or Line Switch-based control mechanism. By default, the ZSC010 is configured in Mains mode.

The ZSC010 works with Sensor Ready (SR) drivers via a standardized Zhaga Book 18 connector. The ZSC010 is not only energy-saving, but also a long-lasting, durable and cost-effective solution. The product is easy to use from start to finish.

Please visit our website for more information : https://remoticom.com/en/product/zhaga-smart-controller-gps-luxsensor-astro-clock/

Installation QuickStart Guide

The installation guide (English) can be found at the bottom of this page.

Installing the ZSC010

Installation and commissioning of the ZSC010 controllers take place using the Remoticom ZSC010 app, available from the Google Play store: https://play.google.com/store/apps/details?id=com.remoticom.zsc010&pli=1

Product Pictures

Product Datasheet

English version of the datasheet/specsheet can be found here below.