Product Description

The Remoticom ZMS200 "Zhaga Motion Sensor" can be used to switch on and off public luminaires by means of a motion detection sensor based on PIR technology. The ZMS200 builds a Bluetooth mesh network with other devices from the ZMS and ZLC family so that when motion is detected by 1 device in the Bluetooth network, the other devices also receive the signal to change the light intensity. With this, luminaires can be switched and it is possible to apply a follow-me principle. 

Think for example of a [high-speed] bike path where the light will follow the cyclist as a "light train" or "light bubble".

For more information, please visit our website : https://remoticom.com/en/product/zhaga-motion-sensor-bluetooth-mesh-pir/

Default settings for the ZMS200 are:

• DIM level 20%       (no movement detection)
• Max level 100%     (after movement detection)
• Burn time 15 min  (after movement detection)

These parameters are fully configurable using the ZMS200 Android App or from factory when placing your order of larger volumes.

Installation QuickStart Guide

The installation guide (English) can be found at the bottom of this page.

Installing the ZMS200

Installation and commissioning of the ZMS200 controllers take place using the Remoticom ZMS200 app, available from the Google Play store: https://play.google.com/store/apps/details?id=com.remoticom.zms&gl=US

Product Pictures

Product Accessories

The ZMS200 can be equipped with a special cover to limit motion detection in specific area's. The ZMS-COVER offers the possibility to restrict the coverage areas, for example to exclude adjacent roads, footpaths and/or cycle paths. The cover has four 90˚C breakout gates. By removing breakout gates, different coverage areas can be created be created. Please fid the datasheet of this ZMS-COVER product here below. The article code is 786.11.190.01.

Product Datasheet

English, German and Dutch version of the Datasheet can be found here below.